1/2" NPT 110/120VAC Solenoid Valve Plastic Potable Drinking Water Air N21E

1/2
1/2
1/2

$28.88 Buy It Now or Best Offer
free,30-Day Returns

Seller Store valves4projects
(22905) 100.0%,

Location: San Diego, California
Ships to: US,
Item: 302369972096

Restocking Fee:No
Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:60 Days
Refund will be given as:Money Back
EHCOTECH:EHCOTECH
MPN:N21E-1/2-CC-120VAC-ES
Inlet/Outlet Port Size:1/2″ NPT
Valve Body:Plastic: BASF Ultramid® PA 66 (Nylon 66)
Pressure Rating:0 to 100 psi, Vacuum
Max Media Temp:175 F / 80 C
Type:Normally Closed, 2-way

N21E-1/2-CC-12VDC-ES Valves4projects — supplying high quality valves since 2004. Over 50,000 valve orders shipped. EHCOTECH N21E-1/2-CC-120VAC-ES SOLENOID VALVE 1/2″ NPT | 110/115/120-Volt AC EHCO-Smart Coil | BASF Ultramid® PA 66 Body / EPDM Diaphragm | Normally Closed | 0 – 100 psi EHCOTECH N21-Series solenoid valves are an affortable but amazingly robust and dependable choice for a variety of water, air, and other general purpose liquid applications. Media being controlled must be compatible with Nylon 66, EPDM rubber, and Stainless Steel (300 and 400 series). The N21-series valves are semi-direct acting, making them suitable for many low differential pressure applications where traditional, pilot operated, solenoid valves may not perform reliably. The N21-Series uses an EHCO-Smart coil with an internal “hit-and-hold” circuitry. The EHCO-Smart coil drastically drops the “hold” voltage and amperage to maintain a lower coil temperature for long coil life. General 2-way, Normally Closed (energize to open, de-energize to close), unidirectional Semi-Direct Acting valve (no minimum pressure requirement and great low pressure fow caracteristics) Fast acting Port / Orifice Size 1/2″ NPT (female) inlet / outlet ports Outer thread diameter / TPI (threads per inch): 0.840 inches / 14 TPI Internal orifice diameter: 1/2″ or 15.0 mm Cv value: 4.8 Pressure and Temperature 0 to 100 psi or Vacuum Max media temp: 175° F (80° C) Suitable Media Water (including potable water) Air Inert Gases Other media compatible with valve materials Coil / Electrical 110/115/120-Volt AC In-rush power: 22VA (Volt-Amps) or 22 WattsContinuous power: 6VA or 6 Watts DIN Connector coil (DIN 43650) Allows installer to run their own wires or cable into the included connector Screw-down terminals inside the connector for wire connections DIN connector housing can be pointed up, down, left, or right Coil IP rating: 65 NOTE: We also carry this valve in 12VDC, 24VDC, 110/115/120VAC and 220/240VAC voltages in our eBay store Valve Materials Valve body: BASF Ultramid® PA 66 (Nylon) Plunger and plunger guide tube: Stainless Steel (300 and 400 series) Diaphragm: EPDM Dimensions Height: 4.25″ Width: 2-5/8″ Length: 3″ Store Policies If you are not completely satisfied, please contact us and we will make it right! 12 month warranty Copyright © Ehcotech International Inc. 2017

Frequently Asked Questions About 1/2″ NPT 110/120VAC Solenoid Valve Plastic Potable Drinking Water Air N21E in My Website

colagoldpusat.com is the best online shopping platform where you can buy 1/2″ NPT 110/120VAC Solenoid Valve Plastic Potable Drinking Water Air N21E from renowned brand(s). colagoldpusat.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 1/2″ NPT 110/120VAC Solenoid Valve Plastic Potable Drinking Water Air N21E on colagoldpusat.com?